If you want to install a bedroom sliding door, then you should realize that it is not impossible for the average person. Making the installation a do-it-yourself project is quite a good idea. However, you also should know that if you botch the job, you will be paying for it. A poorly installed sliding door can cause a variety of problems.
If you do not think that you are up to the challenge, then you might want to get some expert help. Did you know that the dealer you buy the sliding doors from can actually help you with the installation? Actually, when you go with this option, you can get the installation done in a matter of minutes.
SLIDING CLOSET DOORS FOR BEDROOMS
Why is getting expert help necessary? Well, installing sliding doors can be complicated in the measuring part. You need to make sure that your door frame is perfectly square and level. This goes the same for the door. Otherwise, you are going to have some problems in the installation process.
With a sliding door, you want to make sure that the structure that will bear the weight of the door, the top frame, will be able to bear the load properly. If the frame is made out of wood, you need to make sure that the wood is properly weatherproofed and will not rot or weaken over time. This is a very important factor to consider because a weak door frame could lead to more serious damage when the sliding door can no longer be supported by the frame.
The actual process of hanging the door also requires perfection. You need the door to be 100 percent square. This allows for the smooth and flawless operation of the sliding door. If you don't think you are up to the challenge, better get a professional.
Measuring is crucial. You need to make sure that the door you are getting is the same size as the frame. You also need to make sure that the door is perfectly square. How do you accomplish this? An easy way for you to do this would be to take the diagonal measurement of the door. If the measurements are equal, the door is squared.
If you do not intend to install the door immediately after you purchase it, you need to make sure that it is protected. You should store it in a dry, well ventilated area. Store it flat, not standing. You need to protect it from moisture, especially if it is a wood door. Why? Because certain types of wood can swell when exposed to moisture and that could mean problems during installation.
When installing the sliding door, you need to make sure that the bottom railing is exactly underneath the door. This can be a hard task to accomplish. Don't rely on your eyesight. What looks exact to you might not look exact to a measuring tape. You need to take precise measurements in order to make sure that the door fits perfectly onto the bottom railing and thus, works perfectly. Installing a sliding door is no joke.
If you truly want to DIY, then the installation of a bedroom sliding door should be done as carefully as possible. It requires that you put in some hard work. If, however, you want convenience at the cost of a few extra dollars, then you should just get expert and professional help.
Installing Bedroom Sliding Doors - Some DIY Tips
For tips on choosing sliding doors, visit http://www.slidingdoors101.com
SLIDING CLOSET DOORS FOR BEDROOMS
0 comments:
Post a Comment